Skip navigation

Rayco C140 Super Crawler Mulcher

 

Features Specs Showcase
General
Specification Standard Metric
Weight (with Forestry mower) 15,100 lbs. 6,849 kg
Overall Length 17’-9” 541 cm
Truck Height 94.5" 240 cm
Operating Height 93" 236.2 cm
Overall Width 69" 175.4 cm
Cab Width 35" 140 cm
Track Gauge 61" 155 cm
Ground Clearance 15" 38 cm
Warning Lights Engine coolant temperature, engine oil pressure, alternator, intake air cleaner, hydraulic oil filter, hydraulic oil level
Gauges Hour meter, Fuel, Hydraulic oil temperature,
engine coolant temperature, Voltmeter, Engine Oil Pressure, Tachometer
Other Indicators Seat Belt, Preheat, High Speed
Engine
Model Deutz Turbocharged Diesel BF04M2012C
Number of Cylinders 4
Bore 3.98" 101 mm
Stroke 4.96" 126 mm
Displacement 190 cu. inches 4.03 liters
Maximum No-load Speed 2,500 rpm
Gross Power @ 2,500 rpm 131 hp 98 kW
Maximum Rated Torque @ 1,500 rpm 346 ft-lbs. 469 Nm
Valves Overhead Design
Cooling Liquid Cooled
Air Cleaner Dry type dual element with pre-cleaner
Oil Filter Spin-on type
Fuel Tank Capacity 60 gallons 227.1 L
Electrical System 12 volt / 95 amp alternator
Travel Speed (2-Speed)
Low Range

2.6 mph

4.2 km/h
Travel Speed (2-Speed)
High Range

4.4 mph

7.1 km/h
Undercarriage
Specification Standard Metric
Suspension Rigid Type
Track Roller Frame High strength steel
Rollers and Idlers Lifetime lubrication
Track Chain Sealed and Greased
Track Rollers 8 each side
Track Shoes Single Grouser
Ground Pressure 6.1 psi 42 kPa
Track Shoe Width 14" 40.6 cm
Hydraulic System
Specification Standard Metric
Hydraulic Pressure 3000 psi 20,680 kPa
Hydraulic Pump Flow 25 gpm 94.6 L/min.
Lift Cylinders 2-3/4” dia. 7 cm
Roll Cylinder 3.5” dia. 8.9 cm
Hydraulic Reservoir 30 gallons 113.6 L
Hydraulic Cutter System
Specification Standard Metric
Pressure 6,000 psi 41,000 kPa
Flow 69 gpm 261 L/min.
Forestry Mower
Mower Width 64” 162.6 cm
Cutting Width 52” 132 cm
Rotor Diameter 20” 50.8 cm
Speed 1,500 rpm (approximately)
Drive belt Gates® Poly Chain® GT® low maintenance
Cutting teeth (28) Forged, one pc., w/tungsten carbide tips
Belt guard Steel, one piece

.
© Edge Equipment | Home | Corporate Profile | Equipment | Service | Training | Industry Solutions | Benefits | Advantage | FAQ | Links | Contact